The Lynbrook bed features a traditional Mission style look with slats on both the top of the footboard and headboard. Make this a cherish piece to your bedroom collection and have it passed down through generations.
Product Details
FEATURES
- Made from solid American hardwoods, open-grained
- Dovetail slat construction with 4 slats per bed
- King size beds have four support legs
- Queen size beds have two support legs
- Full/twin beds do not require support legs
- Brackets are made of steel, providing the strongest construction
- Bracket is fastened to the head & foot boards by two hardened steel lag bolts
- Brackets have a ledge on the bottom for the rail to rest on, so all the weight is on the bracket
- Workmanship seen in the attention to details that make each bed unique and beautiful
- Requires a boxspring or form of foundation (IE bunkie boards) for mattress
- Built from solid American hardwoods
- Crafted by genuine Amish builders
- The headboard and footboard panels as well as cross rails are mortised into the post for the strongest joint possible.
- Side rails are 1" thick and attach to headboard and footboard with a USA made cast aluminum bracket with a dovetail pocket to hold the cross slats.
- Available in twin, full, queen, or king size
- Shown in Quartersawn White Oak with a Michael's Cherry stain
CARE OF SOLID WOOD FURNITURE
- Place your furniture away from radiators, fireplaces, and heating ducts.
- Position furniture out of direct sunlight or adjust blinds to avoid hour after hour of direct sunlight.
- Control humidity to 40%–45%. In winter use a humidifier, in summer use a dehumidifier or air conditioner.
- Avoid using nail polish remover, alcohol, and other solvents near or on furniture.
- Dust carefully with a soft cloth, following the grain pattern of the wood. Use an old T-shirt, baby diaper or cheesecloth that has been laundered to remove the sizing.
ROUTINE CLEANING AND CARE
- Dust often to remove everyday abrasive particles from wood surfaces.
- Consider cleaning with a mild non-alkaline soap and water. Use the suds in a damp sponge or cloth, but be sure to pre-test the solution on an out-of-sight section to make sure it doesn’t damage the finish. Dry immediately with a soft cloth and buff lightly, following the grain.
- Don't wax or use any polish that contains any silicones! Catalyzed heat and moisture resistant finishes don’t need additional polish, but if you want to use a polish we recommend Parker & Bailey's Furniture Cleaner.
The post Lynbrook Bed appeared first on Amish Direct Furniture.